Abyss 22 Navy II

Product No: 416171


The Abyss 22 Navy II scuba diving regulator is especially designed to withstand the most extreme diving situations faced by US Navy forces around the world. The regulator comes with a special kit for diving in extremely cold water. The second stage is coated with a special fluoropolymer resin finish and features Mares' exclusive VAD system.
The Abyss 22 Navy II regulator guarantees flawless performance, even under ice. The result is a reliable and durable regulator, ideal for diving in even the most extreme cold water conditions.

Product Information


Abyss Navy II First Stage

The Abyss Navy II first stage is highly reliable, even under extreme diving conditions, and is equipped with a high flow rate and pre-oriented DFC outlets. It includes a special kit for cold water dives. This first stage is approved by the US Navy as it has passed the high standards required by the US Naval Forces. It was specifically tested on extreme dives (30-minute duration, 60m depth, 62.5 l/min ventilation, -2°C water temperature, 6-minute ascent in both fresh and salt water, constant cylinder pressure of 170bar).

Abyss Navy II Second Stage

The Abyss Navy II second stage is has a special fluorinated polymer resin finish. It features a Vortex Assisted Design (VAD) system that enables dynamic airflow, ensuring natural and easy breathing at any depth. The cover features a Mesh-Grid system to optimise water inlet and outlet flows, which offers further improved performance, even during strong currents, while diving. The Abyss Navy II second stage is reliable, durable and ideal for diving in the most extreme cold water conditions.


All Metal Technology
First stage:
Balanced Diaphragm
First stage weight INT:
850 g / 30 oz
First stage weight DIN:
685 g / 24.2 oz
Second stage weight:
269 g / 9.5 oz
Total weight (g) INT:
1337 g / 47.2 oz
Total weight DIN:
1172 g / 41.3 oz
High pressure ports:
2 HP 7/16” UNF Ports
Low pressure ports:
1 LP 1/2” UNF Port, 3 LP 3/8” UNF Ports
Hose type:
Rubber hose
Gas used:
Hose length:
80 cm


  1. Mesh Grid
    Mesh Grid

    Mesh GridPatented design which reduces the impact of water flow onto the second stage diaphragm, thus eliminating free flows even in strong currents.

  2. All Metal Technology
    All Metal Technology

    All Metal TechnologyOutstanding mechanical reliability and high thermal conductivity make our metal 2nd stages extremely long lasting and ideal for cold water dives. The high thermal conductivity of metal reduces also the dry mouth feeling during the dive.

  3. VAD - Vortex Assisted Design
    VAD - Vortex Assisted Design

    VAD - Vortex Assisted DesignThe air bypass tube delivers air to the mouthpiece creating a swirling vortex with a low pressure area in the center that keeps the diaphragm down during inhalation, for very sensitive and easy breathing at all depths.

  4. DFC - Dynamic Flow Control
    DFC - Dynamic Flow Control

    DFC - Dynamic Flow ControlMinimizes intermediate pressure drop during inhalation thus maximizing gas delivery, especially under extreme conditions.



Please follow the instructions contained in the manual. You must read and understand all warnings and instructions in their entirety before using our products. Scuba diving is a hazardous activity, which involves a risk of injury to any and all parts of the body. As with all scuba diving equipment, our products are designed to be used by trained, certified divers only.

Regulator Special Disclaimer
Equipment complying with EN 250 is not intended for breathing by more than one user at the same time.

If SCUBA equipment is configured and used by more than one diver at the same time, the cold water and breathing performance may not fulfill the requirements of EN 250. Therefore, the octopus should not be used during dives in cold water. Use of the dual regulator is recommended for cold water diving.

For safety reasons, it is not advisable to use an Octopus second stage that is not a certified Mares Octopus.

Delivery & Returns


Online purchases on mares.com are enabled for Italy, France, Spain, Germany, Austria, Netherlands, Luxemburg, Belgium and Finland. Some products from the catalogue are only available to purchase at an authorised Mares Dealer.

Products shipped in Italy are entrusted to Bartolini couriers. Products shipped in other countries are entrusted to DHL couriers.

Delivery times are 3-5 working days.



If you are not satisfied with your order, you can return it quickly and easily.

You can decide to return any products purchased on mares.com within 30 days of delivery. To return items, use the same box they were received in, complete the returns label found here with shipping details and attach it to the box. Remember to insert the delivery number found on page 1 of the delivery documents.


To allow you greater freedom, we have not chosen a courier service with which you need to return the package, you are free to choose your preferred service provider.

Please remember that shipping costs are your responsibility.


You will receive the total refund on the same payment method you used to place your order, within 14 days after your return has reached our warehouse. 


At the moment, we cannot offer exchanges on our products. If you would like a different size, please return the article for a refund and purchase a new size. If you still have any doubts, you can write us an email at shop@mares.com, our Customer Service team will be happy to help.