Loop 15XProduct No: 416241
The 15X balanced membrane first stage has a DFC output and pre-oriented outputs, making it suitable for octopus configuration. The Loop 15X second stage has been designed and engineered in such a way that it allows the use of an under-the-shoulder hose. Maximum freedom of movement in all directions.
The 15X balanced membrane first stage has a DFC output and pre-oriented outputs making it suitable for octopus configuration. Very compact and with a sandblasted finish.
The DIN300 balanced membrane first stage weighs 598g. In the INT version it weighs 772g.
Second Stage Loop 15X
The Loop 15X second stage has been designed and engineered in such a way that it allows the use of the hose with an under-the-shoulder transition. This configuration enables it to be used with the hose coming from the left and minimises the risk of getting caught during the dive and the vibration of the hose during finning.
The new vertical Loop 15X second stage is designed with a 110 cm rubber hose, which is slightly longer than normal ones.
The new integrated S-VAD (Sagittal VAD) system, the special profile of the internal deflector combined with the double exhaust valve allow natural breathing at any depth, greatly increasing breathing comfort during the dive.
The large silicone vent button enables easy and immediate use even when operated with thick gloves.
The new Loop is a compact and lightweight second stage and is also available as an Octopus in the classic yellow colour.
- Techno Polymer
- First stage:
- Balanced Diaphragm
- First stage weight INT:
- First stage weight DIN:
- Second stage weight:
- Total weight (g) INT:
- Total weight DIN:
- High pressure ports:
- 2 HP 7/16" UNF
- Low pressure ports:
- 4 LP 3/8" UNF
- Hose type:
- Rubber hose
- Gas used:
Please follow the instructions contained in the manual. You must read and understand all warnings and instructions in their entirety before using our products. Scuba diving is a hazardous activity, which involves a risk of injury to any and all parts of the body. As with all scuba diving equipment, our products are designed to be used by trained, certified divers only.
Regulator Special Disclaimer
Equipment complying with EN 250 is not intended for breathing by more than one user at the same time.
If SCUBA equipment is configured and used by more than one diver at the same time, the cold water and breathing performance may not fulfill the requirements of EN 250. Therefore, the octopus should not be used during dives in cold water. Use of the dual regulator is recommended for cold water diving.
For safety reasons, it is not advisable to use an Octopus second stage that is not a certified Mares Octopus.